The Curt Trailer Hitch Receiver # C93CR is the hitch you're looking for. This hitch is a confirmed fit for your 2023 Volkswagen Atlas Cross Sport. It is a Class III hitch with a 2" receiver so it should work with whatever bike rack you have. This hitch has a bolt-on installation and a maximum tongue weight of 750 lbs which will be more than enough for your needs. It also features a lifetime warranty. view full answer...
The 7-Way Trailer Adapter for Towing Trailers with LED Lights # C57003 is designed to just plug right in to the 7-way of your 2022 Volkswagen Atlas Cross Sport. It comes with a bracket that you could use to attach it to the bottom of the rear bumper fascia. view full answer...
I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # DT96MR for your 2020 Volkswagen Atlas Cross Sport. I found that this receiver is easier to install than the Curt # C93CR that also fits your Atlas. You will not have to remove the exhaust hanger to install the receiver and torqueing the hardware is easier being as the hardware mounts through the side of the frame and not down through the frame.
For the 4-Way harness I always recommend the Tekonsha T-One Vehicle Wiring Harness... view full answer...
I recommend using the Curt Trailer Hitch Receiver # C93CR on your 2023 Volkswagen Atlas Cross Sport. This receiver is made in the USA and has a lifetime warranty.
The T-One Vehicle Wiring Harness # TK89FR will give you a 4-way flat connector. This connector is most commonly found on smaller trailers and also can be used with Auxiliary Lights # C53201 on larger hitch mounted accessories. If you will be pulling larger trailers which have electric brakes you will need to add a 7-Way # ETBC7... view full answer...
We have confirmed with Curt that the Class 3 trailer hitch # C93CR will fit the 2024 Volkswagen Atlas Cross Sport. This is a 2" receiver hitch which can tow up to 5,000 lbs and 750 lbs of tongue weight. view full answer...
Since the Curt Hi Rise Hitch ball part # C40034 is designed for a 1 inch diameter hitch ball hole you'd need the hitch ball bushing part # 58184 to use it with the Curt ball mount # C45338 that you have. view full answer...
Yes, I can help you out with the parts you will need to tow with your 2022 Volkswagen Cross Sport. You will need a hitch, wiring harness for the lights on your trailer and a ball mount kit. I have listed a recommendation for each part below.
-Hitch: I recommend the Curt Trailer Hitch Receiver # C93CR which is confirmed to fit your 2022 Volkswagen Cross Sport. This hitch is made in the USA, has a bolt-on, no-drill installation and has a 2" receiver opening which is the most common size... view full answer...
Yes, the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes # HLY84FR is the Hollywood Racks part number HR1500.
We also have the Hollywood Racks Bike Frame Adapter Bar # HRBA-PRO for your alternative style frame bikes to properly secure in this rack. It has a telescoping tube that adjusts from 15-13/64" to 28-13/16" long to fit a large variety of bikes. view full answer...
Yes, The Yakima RoadShower Portable Solar Shower # Y79VR can attach to your Pioneer Platform Rack but you will need to install The Load Bar Adapter # RR43137B onto the Pioneer platform so the shower has something to attach to.
I also recommend The FlexHead Shower Head # Y04104 which will give you hands-free showering with the positionable shower head.
I attached a review video link below. view full answer...
Yes, the Curt Trailer Hitch Reciever # C93CR is the correct receiver to fit your 2023 Volkswagen Atlas Cross Sport. This receiver is custom fit to install on your VW and may require some rear fascia trimming as it has a tight fit with your lower fascia.
I recommend installing the Curt T-Connector Vehicle Wiring Harness # C67WR when you install the receiver. This will give you the 4-way flat connector which is most commonly used on small trailers. It can also be used with Auxiliary Lights... view full answer...
For starters, the Curt # C93CR Class III hitch you'd looked at would work perfectly.
For a trailer wiring harness, I'd recommend the Tekonsha # TK89FR trailer wiring harness. For a ball mount, use part # 40346 along with a # PC3 hitch pin. For a 1-7/8 inch ball, use # 19260 or # 63845 for a 2 inch trailer ball.
I've linked to the installation instructions for the hitch and the trailer wiring harness. view full answer...
For the 2022 Volkswagen Atlas Cross Sport we have the Curt hitch # C93CR as a confirmed fit and for wiring the part # C67WR. This trailer wiring harness does store in the trunk when not in use and then when needed you'd pull it out of the trunk and then shut it on top of the harness. I know this would seem like it might damage the wiring but the weather-stripping is so thick that basically it just gets squeezed by a thick rubber seal and the wiring does not get damaged in any way.
What... view full answer...
For your 2020 Volkswagen Atlas Cross Sport 4 cylinder the hitch I recommend is the Curt part # C93CR Adam because we have found that the Curt hitches are the highest quality and this one comes with more bolt leaders so the install would be a little easier. view full answer...
Even though we recommend that neighbors place a cargo box like the Thule Pulse # TH615 centered on your crossbars, you can technically clamp one side of your box onto the crossbars past the feet of the roof rack. However, there are some things to keep in mind. First off, if there is nothing mounted on the other end of the rack, this creates a lot of off-balance weight on top of the crossbar system. This is why I generally recommend that if you do have clamps over the feet, it is always... view full answer...
The hands free liftgate function of your 2021 Volkswagen Atlas Cross Sport will still function with the Draw Tite hitch # DT96MR installed but you'd have to kick to either side of the hitch opening instead. view full answer...
For your 2022 Volkswagen Atlas Cross Sport, the Curt Trailer Hitch Receiver # C93CR is a confirmed fit. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
If you plan to do any towing, you can round out a tow package by adding the T-One Vehicle Wiring Harness # TK89FR and the etrailer Ball Mount Kit... view full answer...
Yes! The Rhino-Rack Dome 1300 Awning - Roof Rack Mount - Bolt On # RR32125 comes with the brackets that attach directly to Pioneer Platforms like the # RR87QX. This pioneer platform is a confirmed fit for the 2020 Volkswagen Atlas Cross Sport with flush rails.
I went ahead and attached the parts list that shows these brackets that are included in the # RR32125. view full answer...
I went ahead and pulled the Rhino-Rack Sunseeker Awning # RR32132 from the warehouse. The length of the case of the awning that mounts to the rack is 79-1/2 inches long. I went ahead and attached a diagram that shows this measurement. view full answer...